Steering wheel arrow indicator

Product Introduction

1. The device consists of an aluminum-clad steel aluminum alloy guide rail, stainless steel core, end anti-drop device, deflector, connecting fittings, fall arrester, and fixing fittings. All components undergo anti-corrosion treatment to ensure a service life equivalent to that of the tower.
2. The device is suitable for all types of towers and can effectively lock at any part of the tower where the guide rail is installed.
3. The device adopts a built-in guide rail structure, which is anti-rust, anti-fouling, easy to maintain, simple, and lightweight. The weight per meter of the guide rail does not exceed 1.5 kg. The guide rails are connected using male-female core holes for easy alignment and fixation. The surface roughness of the guide rail is not greater than 6.3, and the cross-sectional structural deviation is less than 0.5 mm.
4. The device can carry a total mass of 100 kg, including the operator and carried items. Tower climbers wear a safety harness with a buffer pack. In the event of a fall, the impact force on the human body is less than 6 kN, and the device remains intact.
5. The guide rail can withstand a static load of 15 kN without any structural damage.
6. The fall arrester is lightweight (0.6 kg) and has a design service life of 5 years. It features one-way locking when passing through vertical, inclined, and curved guide rails, and allows bidirectional free sliding on horizontal guide rails. In the event of a collision, it does not lose its locking function and can resume normal operation after unlocking.
7. The fall arrester can withstand a static load of not less than 15 kN and an impact load of not less than 100 kg. When using the fall arrester, the fall distance is short (not exceeding 1.0 m), and the locking distance of the fall arrester is not more than 0.1 m, avoiding inertial locking.
8. Two manual operations are required to install or remove the fall arrester from the guide rail. The fit clearance between the guide rail and the fall arrester is tight (not more than 2 mm), and the fall arrester surface has a clear usage (arrow) direction. Product features: moderately hard lightweight aluminum alloy guide rail with an internal stainless steel core, suitable for all tower types, vertical and horizontal directions, 360-degree smooth transition, and full-process fall protection for personnel during tower climbing.